STEP :: 01
PREPARE THE REMOTE TRANSMITTER
CHARGE THE REMOTE TRANSMITTER
1. Lift the rubber cover protecting the Charging Jack.
2. Connect the charger connector to the Charging Jack.
3. Plug the USB Adaptor into a power source.
During charging, keep the GS-100 in an open,
well-ventilated area.
4. Charge the Remote Transmitter for 2 hours for the
first charge and every charge thereafter.
Using Li-Ion technology, the Remote Transmitter only
requires a 2 hour charge� It is not harmful to let the unit
charge for more than 2 hours�
5. When charging is complete, remove the charger
connector, and replace the rubber cover. The unit
will preform a brief LCD test, and revert back to the
normal LCD screen.
NOTE: Approximate battery life between charges is
50 to 70 hours, depending on frequency of use.
TRANSMITTER LCD
NOTE: The Remote Transmitter's backlight turns off after 5 seconds to conserve battery life; the LCD display
automatically turns off after approximately 30 minutes.
BATTERY STATUS
STIMULATION LEVEL
STIMULATION INDICATOR
BATTERY ICON:
CYCLES LOW, MEDIUM,
AND HIGH DURING
CHARGE. FULL BAR WHEN
COMPLETELY CHARGED.
CHARGER CONNECTOR
PLACED IN THE
REMOTE TRANSMITTER
CHARGING JACK.
TONE INDICATOR
7