Publicité
Les langues disponibles
Les langues disponibles
3
before the first use
Before you use the appliance for the first time, please do as follows: Carefully unpack the appliance and remove all the packaging
material and any promotional stickers. Keep the material (protective foil, plastic, polystyrene and cardboard) out of reach of children.
Check the appliance after unpacking for any damage, possible from transportation. Place the appliance on a flat and stable surface.
Make sure there is enough open space around the appliance for the intake and/or outlet vents. A minimum clearance of 10 cm is
required between the appliance and any adjacent walls. The appliance needs good ventilation for easy dissipation of heat, high
efficiency of refrigeration and low power consumption. Make sure the appliance is placed in a level horizontal position by screwing in
the two adjustable front legs. Do not place the appliance next to radiators, heaters, stoves or in direct sunlight.
Note: check the climat class of the appliance. When installing the appliance in a environment that is not suitable, the appliance can
not function properly.
Leave the appliance to stand for at least 3 hours before you insert the plug into the socket.
First clean the interior of the appliance. Use warm water and a neutral detergent. After cleaning, rinse the interior with clean water and
rub dry. Leave the appliance to dry for 1 to 2 hours.
CONNECTION TO THE MAINS
The appliance features internal controls. Check whether the thermostat is off [OFF]. Check that the voltage in your home
corresponds with the voltage printed on the back of the appliance and plug it in a socket.
4
usage
TEMPERATURE ADJUSTMENT
Turning the knob to a different setting changes the temperature in the larder.
Available knob settings:
Turning the appliance off - setting OFF
Maximum temperature – setting 1
Optimal temperature – setting 2-5
Minimum temperature – setting 6
Set the temperature with the thermostat and choose a setting between 1 and 6. We advise to set the appliance on setting 2 or 3.
The appliance now cools continuously until the set temperature has been reached. Do not place anything in the appliance until the
set temperature is reached. This usually takes 3 or 4 hours. Then set the thermostat at the desired setting and place food into the
refrigerator.
Temperature inside the larder
Do not change the temperature settings due to the change in the season of the year. The ambient temperature increase will be
detected by the sensor and the compressor will be switched on automatically for a longer period of time in order to maintain the
temperature set inside the refrigerator.
Minor changes in temperature
The slight changes in temperature are perfectly normal and may occur, for instance during the storage of large quantities of fresh
products in the larder, or when the door is open for a longer period of time.
This will not affect the condition of the stored food and the temperature will quickly return to its set value.
Note:
The ambient air temperature, how often the door is opened and the position of the appliance can affect the internal temperature.
These factors must be taken into account when setting the thermostat.
• Do not put hot food into the appliance.
• Never introduce volatile, inflammable or explosive fluids such as alcohol, acetone or petrol because of the risk of explosion.
• It is advisable to wrap meat and fish to avoid odours.
• Leave sufficient space between the food to enable air to circulate correctly between them. Similarly, when storing
them, avoid puttin food items in contact with eacht other.
• The door should not be left open any longer than necessary.
16
•
English
(least cold)
(most cold)
Publicité
