Thane Bike Nook Instructions De Montage page 9

STORING YOUR BICYCLE
Setting the height of the V-Slot
Important: To store your bicycle compactly
and securely, the V-Slot must be set at a
height above the Track that matches the
size of your bicycle.
Tip: A rough guide to setting the height of the
V-Slot is to measure the distance between your
bicycle seat tube and the back of the wheel
(measured across the back-wheel axle (see
illustration below). Use this distance as the
approximate height to position the V-Slot above
the Track. Notice through which hole in the
Upright the Adjustment Knob should be placed
to ensure that the V-Slot is set at this height.
Then select the hole in the Upright that is just below
that one to place the Adjustment Knob through.
Secure the Adjustment Upright to the Upright by
tightening the Adjustment Knob.
Seat Tube
Horizontal Storage
Position the back wheel of the bicycle against the
Ramp, facing the Bike Nook™ Pro (see Fig.1).
Roll the back wheel of the bicycle over the Ramp onto
the Track until the wheel engages with
the Upright (see Fig. 2) below.
Vertical Storage
Lift the front of the bicycle upwards and rotate it slowly
to a vertical position, and slightly beyond (see Fig.3),
until the seat post can be lowered to rest into the
V-Slot, with the back wheel engaged with the Upright
(see Fig. 4).
All manuals and user guides at all-guidesbox.com
7
Ramp
Horizontal Storage
Set V-Slot
at this hight
Fig. 1
V-Slot
Adjustable
Upright
Upright
Track
Fig. 2
Fig. 3
Fig. 4
Strap
V-Slot