Thane Bike Nook Instructions De Montage page 7

STEP 3
Connect the Upright to the Cross Bar
7. Upright
11. Socket Wrench
12. Allen Key
13. Washers
14. Nuts
16. Bolts
Place the Upright in- between the gap
between the Diamond Bracket and the
L-Piece
GAP
Ensure the holes of the Diamond Bracket,
the Upright and the L-Piece are aligned
Place Bolts into each of the remaining
two holes in the L-Piece
Place a Nut and Washer on the protruding
Bolt end and tighten using the Allen Key
and Socket Wrench
The Upright should now be securely
connected to the Cross Bar
All manuals and user guides at all-guidesbox.com
7
5
13
14
16
11
7
14
13
12
16