Bartscher TS 500 Notice De Montage page 5

ASSEMBLY:
1. Unpack the unit's parts and ensure all of them are present.
Remove all packing material.
2. Begin assembly by mounting the shelves to the
frame.
Screw in the shelves using the included Allen key,
beginning with the washers and nuts.
3. Turn the trolley upside-down and screw the
swivel castors into the frame. Place the
bumpers above the castors.
4. Carefully place the trolley on the ground and ensure all the castors are touching the
floor. Turn the screws tightly with the Allen key. Use the wrench included to turn the
nuts tightly.
5. The height of the wheels can be regulated as needed using the hex nuts.
NOTE!
Remove the protective film after assembly!
Bartscher GmbH
Franz-Kleine-Straße 28
D-33154 Salzkotten
Germany
- 4 -
Screw
Tel.: +49 (0) 5258 971-0
Fax: +49 (0) 5258 971-120
Nut
Washer