LG 14UT70Q Serie Manuel Du Propriétaire page 22

3 Connecting LAN Adapter
Left
Right
Power Port
HDMI Port
1 2
USB-C™ Port (USB 3.2 Gen 2x1
/ Can connect to a LAN adapter)
Headphone Port
3
(4-pole Earset Port )
1 The USB-C™ port provides Quick Charging and Always-On Charging functions for
devices that support USB PD (Power Delivery).
2 The names of USB versions have changed from USB 3.0 (or USB 3.1 Gen 1) and
USB 3.1 (or USB 3.1 Gen 2) to USB 3.2 Gen 1x1 and USB 3.2 Gen 2x1. Devices that
are not authorized or certified for USB connection may not operate normally when
connected to the USB port.
The transmission speed of a USB port may differ depending on the type of storage
device in the system (NVMe™, SSD, HDD, etc.) and the connected USB device.
3 The 4-pole ear microphone port supports US type 4-pole standards and the
European 4-pole ear microphone may not work properly.
When using a headset with microphone (or Bluetooth headset), audio input and
output are directed to the connected device and the microphone and speaker on the
PC will not work.
The 4-pole ear/microphone port does not support an external standalone
microphone.
Connecting LAN Adapter
System Reset
When system is in stop or has not been finished properly while installing and
using OS, you should reset the system.
Built-in Speakers
microSD Card Slot
2
USB Port (USB 3.2 Gen 2x1 )
Security Keyhole
(Kensington Security Slot)
Connecting to AC (Mains) Power
The AC adapter is used to power and charge the PC.
• Do not use any other AC adapter than the one that was provided when you purchased
• The power cable and AC adapter may differ depending on your country or region.
1 Connect the LAN adapter to the USB-C™ port on the PC.
• The USB-C™ port can be used without having to
differentiate between the top and bottom surfaces.
2 Connect the network cable (LAN) to the LAN adapter.
3 Check if you can connect to the internet properly.
1 Remove the adapter and hold the power button
down for approximately 6 seconds to reset the
system.
2 Once the system has reset, press the power
button again to turn on the computer.
y Unsaved data may be lost. Pressing the power button
CAUTION
!
while the PC is in use may cause damage to the hard disk
or a system error.
this product.
1 Connect one end of the cable to the AC adapter
and the other end to a power outlet.
• The AC adapter can be used from 100 V to 240 V.
2 Connect the AC adapter to the PC.
• Ensure that the power jack linked to the AC adapter and product is
connected firmly.