Publicité
Les langues disponibles
Les langues disponibles
CONTROLS
Appliance controls
The control panel is shown in figure 10. It is also shown below for your
reference:
Rapid Freezing
When the Rapid Freezing function is active, the temperature in the com-
partment will be reduced to –32°C. To enable or disable Rapid Freezing,
touch the "Function" sensor repeatedly to cycle through available func-
tions. When the Rapid Freezing icon flashes, touch "OK" to confirm.
Note: If you do not touch "OK" within 5 seconds, the function will not be
activated. The Rapid Freezing function turns off after 26 hours and the
previous temperature setting is restored. The Rapid Freezing function
will only activate in the freezer mode.
When you plug in the appliance to the power supply,
all indicators light up for 2 seconds. When you close
the door, the display remains backlit for about 3 min-
utes and then backlight turns off. To activate the dis-
play, open the door or touch any of the touch sensors.
CoolAdapt
CoolAdapt is a convenient solution that allows you
to use the appliance as a refrigerator or a freezer.
Please note that once defrosted, food should not be
frozen again. Remove the food before switching the
appliance to another mode of operation. Press and
hold "–" for 3 seconds to change the mode of oper-
ation.
Adjust temperature inside the chamber
Touch the "+" or "–" button once, the temperature
indicator will start blinking. Now use "+" or "–" to
adjust the temperature inside the chamber depend-
ing on the set mode (from 2°C to 8°C for refrigerator
mode or –16°C to –24°C for freezer mode). Touch OK
to confirm or simply wait 5 seconds. Operating mode
indicator will be shown on the display.
- 16 -
Publicité
