Samsung SC07K51 Serie Manuel D'utilisation page 18

Troubleshooting
Symptom
Motor does not start.
Suction force is gradually
decreasing.
Cord does not rewind
fully.
Vacuum cleaner does
not pick up dirt.
Body overheating.
Static electicity
discharge.
Noise from the vacuum
cleaner increases and the
suction power is weak.
• This vacuum cleaner is compliant with the following regulations:
– RTTE Directive(1999/5/EC)
– Electromagnetic Compatibility Directive : 2004/108/EEC
– Low Voltage Directive : 2006/95/EC
• The official Declaration of conformity may be found at http://www.samsung.com, go to
Support. Please search Product Support and enter the model name.
18 English
• Check the cable, the power plug and outlet.
• Leave it to cool.
• Check if there is any blockage, and remove it if required.
• Please check the filters, and if required, clean as illustrated
in this manual.
– If filters are out of condition, replace them to new ones.
• Pull the power cord out 2 - 3 m and press the Cord rewind
button.
• Check the hose, and replace it to new one if required.
• Check the filters, and clean as illustrated in the this manual
if required.
• Reduce suction.
• This may also occur when air in the room is very dry.
Ventilate the room so that air humidity becomes a normal.
• Disassemble the anti-tangle turbine inside the dustbin and
remove dust in it.
• After cleaning the anti-tangle turbine, reassemble it
correctly in the dustbin.
Checklist