Publicité
Les langues disponibles
Les langues disponibles
USE
Before the first use
- Unpack the unit and remove all covers. Make sure that each part is in good
condition.
- Clean the cheese holder and grill plate with a damp cloth and dishwashing
liquid.
- Let them dry before putting them in place.
- Position the grill plate securely on the support.
- Plug in the appliance and run it for 10 minutes before putting the cheese
in. Slight smoke will escape - this is quite normal.
Operation
• Make sure the unit is turned off.
• Place the cheese on the cheese holder. Push the cheese between the
two holding plates and screw in.
• You can adjust the height of the cheese holder with the nut so that the
cheese is just below the heating element. Make sure that the surface to
be melted is parallel to the heating element, at a distance of about 2cm.
The unit becomes very hot during use. Do not touch hot surfaces.
If the cheese is melted in sufficient quantity, rotate the holder with the handle;
turn the cheese holder so that the cheese is next to the heating element. Tilt
the cheese holder around the hinge and scrape and pour the melted cheese
onto a plate.
After 4 to 5 scraping operations, remove the crust that has not melted.
After use, unplug the unit and wait for it to cool completely before handling
it.
CLEANING AND MAINTENANCE
Unplug the unit and wait until it has completely cooled down.
Never immerse the device in water or any other liquid. Do not put the
appliance in the dishwasher.
13
Publicité
