Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
BABY WEIGHING MODEL
When the adult step on the scale and the weight is hold, press the
button to the baby
weighing model in 12 seconds. The LCD will display 0.00 kg/lb/st. When the adult go away to
hold the baby, LCD indicator "
" and "MODEL" in 30 SEC. the same adult hold the
baby in the arm and step on the scale, The LCD display the baby weight and "HOLD" and
.
( The scale automatic memory the baby weight).
Tips:
1)When the baby weight is hold, Press the
button, quit the baby model.
2)It must be same adult to hold the baby. If change the adult, press the
button enter into
baby model, and then hold the baby to weight.
3)When switch the ordinary weighing model and baby weighing model, the scale can't move.
AUTOMATIC SWITCH OFF
The scale will be switched off automatically after 12 seconds of idle time.
UNIT SWITH
The scale by default is set to kg. please press the switch button on the back of scale to switch
to kg or lb.
OVER-LOAD INDICATOR
When the scale is over 180kgs, the "Err" will be displayed.
ADVICE FOR USE AND CARE
Place the scale on a solid & flat surface will ensure accuracy of your scale.
Always weigh & place the scale on a same spot.
Do not let water get into the scale, as it will damage the electronics.
Do not use this scale for legal trade.
Treat the scale with care, as it is a precision instrument.
Do not drop or jump on the scale to avoid damaging the sensor.
I
4
Mother & Baby Scale User Manual
Publicité
Table des Matières
