Button Functions; On/Off/Tare Button; Unit/Music Button; Set Button - weewell WWD700 Mode D'emploi

Button Functions

ON/OFF/TARE Button:

• OFF state: Press this button to power on.
• ON state: Press this button to Tare off.
• ON State: Hold this button for a few seconds to power off.

UNIT/MUSIC Button:

• Press this button to play music while weighing, and press the same button to
change music.
• Hold this button for a few seconds to change unit.

SET Button:

• While weighing, press SET button to see previous weight measurements. It
switches back to weighing state in three seconds. The scale stores last 10 meas-
urements.

Special Operation Functions:

Tare Off:

1. While the scale is off, put something on the scale less than 10 kg like blanket,
then press ON button, get back the blanket after see 0,000 kg on screen. You see
a minus value on the screen after that, you can delete by pressing TARE Button.
2. Turn on the scale; put something on the scale less than 10 kg like a blanket when
"0,000 kg" is displayed on the screen. Screen shows the weight of blanket. When
the value fixed, press TARE Button, this provide to see zero value on the screen. If
you get back the blanket, a minus value appears on the screen. If you press TARE
Button, you see zero value on the screen.

Weighing Function:

Put the scale on a horizontal plane. After turned on and saw 0,000 kg on the
screen, place your baby on the center of baby scale. After the value is fixed,
music begins to play. You can use weighing function again after music stops.
4 I
WWD700 USER MANUAL
All manuals and user guides at all-guides.com