MPM MKE-20 Manuel De L'utilisateur page 23

during operation. Do not touch them, because doing so may cause burns. Setting the thermostat
to "1", "2" or "3" allows gentle cooking, while setting it to "4" or "5" heats up the food faster.
6. After cooking, turn the thermostat knob to the OFF position, unplug the cooktop from the mains
and wait until it cools down.
7. Do not use any pots that are unstable and may fall over. Use pots with flat bottoms to ensure full
contact with the cooking plate and optimal efficiency.
8. To ensure long life of the cooktop, do not let any liquids drip onto the cooking plates. Smoke may
appear when using the cooktop for the first time - this is a normal phenomenon and will subside
in further use.
CLEANING AND MAINTENANCE
Before cleaning, the cooktop must be unplugged and left to cool down. The ceramic sur-
face must be cleaned with damp cloth and a gentle cleaning agent for ceramic surfaces,
and the housing must be cleaned with a damp cloth. Make sure water does not penetrate
into the cooktop, because this may damage the cooktop.
NOTE! The cooktop and the power lead must not be submerged in water or other liquids.
TECHNICAL DATA
Technical parameters are indicated on the product nameplate.
Length of power cord: 0,8 m
NOTE! MPM agd S.A. reserves its right to modify the technical data.
Proper disposal of the product (waste electrical and electronic equipment)
Marking on the product indicates that after the service-life of the product expires, it should not be dis-
posed with other type of municipal waste. Used equipment may have a negative impact on the environ-
ment and health of people due to potentially containing hazardous substances, mixtures and components.
Mixing electric waste with other types of waste or disassembling those in an unprofessional manner may
cause a release of substances that are hazardous to the environment and health. Used equipment should
be handed-over to a point for collection of electric waste. In order to obtain detailed information regarding the
electric waste collection points, the user should contact the municipal point of electric waste collection or used
equipment processing department.
EN
23