Publicité
Les langues disponibles
Les langues disponibles
3. Installation method
NOTE: The PCB is mounted in the upper part of the wired
controller. Be careful not to damage the board with the
slot screwdriver.
3. Fasten the back plate of the wired controller
For exposed mounting, fasten the back plate on the wall with the
3 screws (M3.9*25) and plugs. (Fig.3-3)
Use two M4X25 screws to install the back cover on the 86 switch box,
and use one M3.9*25 screw to fix to the wall.
5
Back plate
Fig 3-3
Screw hole fixed on the wall, useone M3.9*25mm
Screw hole installed on 86 switch box, use two
Fig 3-4
Screws (M3.9*25)
M4X25
mm
Publicité
