Publicité
Les langues disponibles
Les langues disponibles
3. Installation method
NOTE: Put on a at surface. Be careful not to distort the
back plate of the wire controller by overtightening the
mounting screws.
4. Battery installation
Put the battery into the designated spot and make sure the positive
side of the battery is in accordance with the positive side. (See
Fig.3-5)
Please set the correct time on the first-time operation. Battery in the
wire controller can operate when a power failure occurs which
ensure the time is kept right. When the power restores, if the time
displayed is not correct, it means the battery is dead and should be
replaced.
Fig 3-5
6
Publicité
