sunjoe SPX2990-BLK Mode D'emploi page 7

Fig. 2
High-pressure
hose holder
3. Slide the cord holder into position (Fig. 3).
Fig. 3
4. Slide the trigger gun holder into position (Fig. 4).
Fig. 4
Trigger gun
holder
5. Slide the spray wand protector into position (Fig. 5).
Fig. 5
Fix with
4 screws
6. To connect the spray wand with the trigger gun, press
the wings of the spray wand into the slot of the trigger
gun, then twist counterclockwise until the 2 parts are
completely locked together (Fig. 6).
Fig. 6
Cord holder
7. Connect the high-pressure hose to the trigger gun. Twist
to secure the connection (Fig. 7).
Fig. 7
7
Spray wand
protector
Spray wand
Trigger gun
High-pressure hose
Trigger gun
Spray wand wings