Samsung NE58K9560 Serie Manuel D'utilisation page 58

Troubleshooting
Information codes
OVEN
Displayed code Possible cause
This code occurs if the control key is
short for 1 minute.
This code occurs if the door lock is
mispositioned.
This code occurs if communication
between the Main and Sub PBA is
interrupted.
This code occurs if communication
between the Main and Touch is
interrupted.
The oven sensor is open when the
oven is operating.
The oven sensor is short when the
oven is operating.
This code occurs if the internal
temperature rises abnormally high.
The PCB sensor is open when the
oven is operating.
The PCB sensor is short when the
oven is operating.
This code occurs if the PCB
temperature rises abnormally high.
58 English
NE58K9560WS_AA_AC_DG68-00722A-01_EN.indd 58
COOKTOP
Displayed code
Solution
Press OFF, and then
restart the oven. If
the problem persists,
disconnect all power to
the range for at least
30 seconds and then
reconnect the power.
If this does not solve
the problem, call for
service.
Call for service
Possible cause
Turn the knob to Off,
and then turn it to the
setting you want again.
If the problem persists,
This code occurs if communication disconnect all power to
between the Main and Inverter PBA the range for at least
is interrupted. 30 seconds and then
reconnect the power.
If this does not solve
the problem, call for
service.
The top sensor is open when the
burner is operating.
The top sensor is short when the
burner is operating.
The IGBT sensor is open when the
Call for service
burner is operating.
The IGBT sensor is short when the
burner is operating.
This code occurs if the DC fan motor
is open or locked.
Displayed if the cookware on an
element is unsuitable or too small
Check the cookware
or no cookware has been placed on
the cooking zone.
Solution
1/28/2016 6:04:33 PM