Salvus PS310 Manuel D'utilisation page 23

2.3 Changing the user code (by a user, without the master code.)
Please note – the user code may not be the same as the master code!
Make sure that the safe door is open when you change the code (ON – user code – ENTER).
Step
Press ON
1.
Press Enter
2.
Press 3
3.
Press Enter
4.
Key in the current user code, e.g. 111111
5.
Press Enter
6.
Key in the new user code, e.g. 222222
7.
Press Enter
8.
Repeat the new code, e.g. 222222
9.
Press Enter
10.
The new user code is now set. If the new code is not accepted, you hear a long signal and a red light flashes. In
that case, start again at step 1 for changing the user code.
After changing the code, it is best to test the new code several times with the door open.
2.4 Deleting the user code
Only with the master code can a user code deleted.
Step
Press ON
1.
Press Enter
2.
Press 0
3.
Press Enter
4.
Key in the master code, e.g. 567891
5.
Press Enter
6.
Only the master code remains valid. If the user code deletion is unsuccessful, you hear a long signal and a red
light flashes. In that case, start again at step 1 for deleting the user code.
Action
Action
Key
ON
Enter
3
Enter
111111
Enter
222222
Enter
222222
Enter
Key
ON
Enter
0
Enter
567891
Enter
Signal
Signal
23