Korg SQ-64 Manuel D'utilisation page 21

SQ-64 Owner's Manual
■ When the TRACK button [D] is pressed
Pad position Global parameter name
A-5 GATE CV
A-9 MIDI RX
A-10 MIDI TX
■ When the D.SUB-TRACKS button [D1] to [D16] is pressed
Pad position Global parameter name
A-5 GATE CV
A-9 MIDI RX
A-10 MIDI TX
■ When the CONTROL button is pressed
Pad position Global parameter name
A-10 MIDI TX
PARAM knob Value (initial value is in boldface)
PARAM1 ---, V-TRIG, S-TRIG
5V, 10V
PARAM2
PARAM1 ---, CH1 - CH16 (CH10)
PARAM2 USB OFF, USB ON
PARAM3 MIDI OFF, MIDI ON
PARAM1 ---, CH1 - CH16 (CH10)
USB OFF, USB ON
PARAM2
PARAM3 MIDI1 OFF, MIDI1 ON
PARAM4 MIDI2 OFF, MIDI2 ON
PARAM knob Value (initial value is in boldface)
PARAM1 V-TRIG, S-TRIG
PARAM1 CH1 - CH16 (CH10)
PARAM2 ANY, 0-127
PARAM1 CH1 - CH16 (CH10)
PARAM2 0-127
PARAM knob Value (initial value is in boldface)
CH1 - CH16
PARAM1
USB OFF, USB ON
PARAM2
PARAM3 MIDI1 OFF, MIDI1 ON
PARAM4 MIDI2 OFF, MIDI2 ON
Parameter details, remarks
Set the polarity of the gate output.
Set the voltage range for the gate output. (D1 - D8 only)
Set channel on which MIDI messages will be received.
Enable/disable reception of MIDI messages from USB-MIDI.
Enable/disable reception of MIDI messages from MIDI input.
Set channel on which MIDI messages will be transmitted.
Enable/disable transmission of MIDI messages to USB-MIDI.
Enable/disable transmission of MIDI messages to MIDI1 output.
Enable/disable transmission of MIDI messages to MIDI2 output.
Parameter details, remarks
Set the polarity of the gate output..
Set channel on which MIDI messages will be received.
Set MIDI note to be received.
Set channel on which MIDI messages will be transmitted.
Set MIDI note to be transmitted.
Parameter details, remarks
MIDI TX CHANNEL
MIDI TX USB
MIDI TX MIDI1
MIDI TX MIDI2
21