i.t.works 2040 Manuel D'instructions page 20

2040 Manual-E/F/(515542-00)
EXPOSURE COMPENSATION
The camera uses Auto Exposure to provide optimally exposed pictures under most conditions.
If the main subject turned out too light or too dark, you can use the Exposure Compensation
feature to improve the result.
Exposure
Compensation
Mode
+
–
How to use Exposure Compensation:
1. Press the MENU button in the (
2. Press
3. Press to display the Exposure Compensation bar on the LCD.
4. Press or
5. Press the OK button to confirm the selection.
• The camera will return to picture taking mode.
TAKING VIDEO CLIPS
The camera can capture video clips.
To record a video clip:
1. Press the MENU button in the (
2. Press to enter the Mode menu.
3. Press to enter video clip mode.
4. Position the subject in the viewfinder or LCD.
5. Press the Shutter button to begin recording a continuous video clip.
2004:04:30
MAIN MENU
+ EV
–
WB
WB
Brightness
Setup
Increasing the Exposure in pictures that are too dark, will make
the picture lighter.
Reducing the Exposure in pictures that are too light will make the
picture darker.
) Camera Mode.
until ( ) EV is highlighted.
+
–
to change the Exposure Compensation.
MAIN MENU
Mode
M
Size
Quality
Flash
) Camera Mode.
5:53 PM Page 18
– EXPOSURE VALUE +
Description
MODE
Video Clip
Self-timer
Main Menu
18
TAKING A PICTURE