Télécharger Imprimer la page

Sharp SWA2450GS Manuel D'installation page 6

Masquer les pouces Voir aussi pour SWA2450GS:

Publicité

Les langues disponibles

Les langues disponibles

4-WIRE CONNECTION
(UNGROUNDED NEUTRAL)
4-WIRE CABLE FROM HOME POWER SUPPLY
IMPORTANT: Use the 4-wire cable from home power supply in
the U.S. where local codes do not allow grounding through neutral,
New Branch circuit installations (1996 NEC), mobile homes and
recreational vehicles, new construction and in Canada.
UNGROUNDED NEUTRAL
A
B
C
A
Junction Box
E
UL listed or CSA
Approved Conduit
Black Wires
B
Connector
Red Wires
C
Ground (Green or
F
Cable from
D
Bare) Wires
Oven
1.
Disconnect power before servicing.
Connect the 2 black wires
2.
connector.
Connect the 2 red wires
3.
C
nector.
4.
Connect the 2 neutral (white) wires
wire connector.
Connect the ground (green or bare) wire
5.
to the ground (green or bare) wire (in the junction box) using a
UL listed wire connector.
6.
Install junction box cover.
E
INSTALLATION INSTRUCTIONS
I
H
G
F
E
D
G
UL Listed Wire
Connectors
Neutral (White)
H
Wires
House Electrical
I
Supply
together using a UL listed wire
B
together using a UL listed wire con-
H
together using a UL listed
from the oven cable
F
INSTALL OVEN
Excessive Weight Hazard
• Two or more people are necessary to move and install oven.
• Attempting to move or install oven alone can result in back
or other injury.
With help, lift the oven partially into the cabinet cutout. Use the
1.
oven opening as an area to grip.
NOTE: Push against seal area of the oven front frame when
pushing the oven into the cabinet. Do not push against the outside
edges.
2.
Push the oven completely into the cabinet until the back surface
of the front frame touches the front wall of the cabinet. Center
the oven within the cabinet cutout.
NOTE: With the oven door open, you will see two holes, one on
each side of the front frame of the oven door opening.
A
B
Holes
A
3.
Drill
1
/
" pilot holes through the 2 holes in the front frame and
8
into the front wall of the cabinet.
Using the 2 screws provided, install the oven to the cabinet.
4.
Replace the oven door and racks.
Reconnect power to the oven.
5.
6
WARNING
Seal Area of Oven
B
A

Publicité

loading