G2M Janton L53 Notice Technique D'instruction

Fitting
Grind the reserve according to your liking.
To optimize your assembly work, we recommend using these parts in conjunction with other parts of the same class in
the JANTON range.
Restriction on use / Precautions for use
Do not heat the joints
The product must be used within the recommended weight limits and in accordance with the assessment
made by an approved ortho-prosthetist depending on the patient concerned
Product maintenance is subject to an assessment made by an approved orthoprosthetist depending on the
conditions of use
All assembly and adjustment work must be carried out by qualified personnel
Cleaning / Storage
Stock the product in a dry place, in its original packing (on which the batch number is marked)
The frequency of inspections to check the equipment is subject to the assessment made by the orthoprosthetist
depending on the patient concerned
Guarantee
The guarantee is valid for one year as from the date of purchase of the product, if the product has been used in
accordance with the manufacturer's instructions.
N.B. In the event of a complaint, please enclose a return form correctly filled in, incomplete forms cannot be dealt with.
EC markings
Groupe G2M hereby declares, in its quality as the manufacturer, that all its parts comply with directive 93/42/EC.
168 ZA des Aubrières - 49412 SAUMUR Cedex (FRANCE)
Tél. : +33 (0)2 41 50 50 91 - Fax : +33 0(2) 41 83 05 82 - E-mail : info@groupe-g2m.com
4/4
www.groupe-g2m.com
NOTICE TECHNIQUE D'INSTRUCTION
Désignation
Demi-étrier de chaussure avec réserve pour butée postérieure et antérieure.
L53 : Série forte Acier
Tête : Ø 26 mm Épaisseur : 4 mm
L54 : Série légère Acier
Tête : Ø 24 mm Épaisseur : 3 mm
L55 : Série enfant Acier
Tête : Ø 22 mm Épaisseur : 3 mm
Destination
Demi-étrier de chaussure entrant dans la fabrication d'orthèses du membre inférieur.
L53/L54/L55
Poids : 320 g
Longueur : 185 mm
Poids : 200 g
Longueur : 185 mm
Poids : 135 g
Longueur : 147,5 mm
1998