G2M JANTON L25 Notice Technique D'instruction

Fitting
Grease these contacts area (Réf. : Z10)
To optimize your assembly work, we recommend using these parts in conjunction with other parts of the same class in
the JANTON range.
Adjustments
When making the orthosis, it is highly advisable to optimize joint alignment to reduce wear of the contact surfaces.
NOTE : Control joint parallelism in order to reduce wear of surfaces in contact.
Spares parts
2
1
Restriction on use / Precautions for use
Do not heat the joints
The product must be used within the recommended weight limits and in accordance with the assessment
made by an approved ortho-prosthetist depending on the patient concerned
Product maintenance is subject to an assessment made by an approved ortho-prosthetist depending on the
conditions of use
All assembly and adjustment work must be carried out by qualified personnel
Cleaning / Storage
Stock the product in a dry place, in its original packing (on which the batch number is marked)
The frequency of inspections to check the equipment is subject to the assessment made by the ortho-
prosthetist depending on the patient concerned
Guarantee
The guarantee is valid for one year as from the date of purchase of the product, if the product has been used in
accordance with the manufacturer's instructions.
N.B. In the event of a complaint, please enclose a return form correctly filled in, incomplete forms cannot be dealt with.
EC markings
Groupe G2M hereby declares, in its quality as the manufacturer, that all its parts comply with directive 93/42/EC.
168 ZA des Aubrières - 49412 SAUMUR Cedex (FRANCE)
Tél. : +33 (0)2 41 50 50 91 - Fax : +33 0(2) 41 83 05 82 - E-mail : info@groupe-g2m.com
4/4
L25
1 Axis L2308
2 Spindle L2302
Spindle tube YA23-0811
Ø 8 x 11 mm
www.groupe-g2m.com
L26
L2308
L2402
YA23-0609
Ø 6 x 9 mm
Désignation
Tourillon articulé pour orthèse du membre inférieur.
L25 : Série forte
L26 : Série légère
Les articulations sont livrées avec 6 rivets (Réf. : V18310).
Destination
Articulation de cheville entrant dans la fabrication d'orthèses du membre inférieur.
Compatibilités
L25 : Section de montant 20 x 5 mm
Tube Ø 8 mm
L26 : Section de montant 18 x 4 mm
Tube Ø 6 mm
NOTICE TECHNIQUE D'INSTRUCTION
Acier inoxydable Poids : 133 g
Acier inoxydable Poids : 103 g
L25/L26
1998