Basic Cleaning; Initial Operation And Use; Assembling The Pair Of Knife Blades; Use Of The Electric Knife - GRAFF EK501EU Instructions D'utilisation

Basic cleaning

Before using the unit for the first time, wash / rinse the bowls and blades in soapy
water and dry thoroughly. All parts of the unit are dishwasher-safe. Wipe the motor
unit with a moist cloth only; do not dip in water.

Initial operation and use

Danger of injury!
The very sharp blade 2 can cut off body parts. Your fingers and thumbs especially
are at risk. Always get hold of the knife blade 2 at the finger protection.

Assembling the pair of knife blades

1. Hold the knife blades next to each other.
2. Insert the metal pin of one blade into the slit of the other blade.
The knife blades 2 always consist of two blades each. Always use both blades.
Use the finger protection to hold both knife blades fitted 2 , and carefully
3.
push the knife blades into the blade slit 2 until they are fit tightly. 2

Use of the electric knife

1. Insert the plug into the socket.
2. Keep the on / off button
3. Cut the requested cutting material.
4. After finishing the cutting process, release the on / off button
5. Remove the power plug.
Press the blade eject button 2 , and use the finger protection 2 to remove the
6.
knife blades 2 . Place the knife blades in the protective cover.
To cut frozen food, use the knife blade with the softer jags 2 .
The time running unit can't exceed 14 minute. Minimum 30 minutes rest time shall
be maintained between two continuous cycles
pressed.
DE
EN
FR
NL
ES
IT
DK
.
21