Using The Remotecam As A Webcam - Swann RemoteCam Instructions D'utilisation

Using the RemoteCam as a WebCam

You can use the RemoteCam as a webcam. To do so, you'll need to grab the drivers
from our website, and install them to your PC. Then, you just have to change the
mode of the RemoteCam once it's connected to your PC.
• Go to http://www.swannsecurity.com/downloads/drivers/
• Open the folder called "
• Download and run the file named "SPCA1528_V2220_MultiLan_090217".
• Follow the onscreen prompts. This program will install the drivers for the
webcam. If you get any "User Account Control" messages, allow the
installation to proceed (or the webcam functions won't work).
• Once the installation is completed, attach the
as detailed above.
• When the computer detects the
press and hold the power button for one second.
• Your PC will automatically finalize installing the webcam.
• The RemoteCam will appear in lists of available video devices as "SPCA1528
Video Camera Device".
System Requirements for Webcam Functions:
Interface Type
Processor
RAM
Video Card
Hard Drive Space
Operating System(s)
The drivers for the webcam functions are not compatible with Mac-based systems.
Windows is a trademark of Microsoft Corporation in the United States and other countries.
Mac is a registered trademark in the United States and other countries.
RemoteCam".
RemoteCam as an external storage device,
RemoteCam to your computer
USB 2.0
Pentium IV or above
1GB or greater
Intel 945 or greater
Minimum 1GB free
Microsoft Windows XP
Microsoft Windows Vista
Microsoft Windows 7
®
®
®
13