THOMSON DSC 723S Mode D'emploi page 42

D - CONFIGURATION AND USE
• Status menu: shows you the current status of
the camera: fi rmware version, user name, main
functions activated, last operations performed.
• Basic settings: enables you to defi ne the
name and time of the camera that can be
embedded into the video of the camera.
• Network: here you have access to all of the
settings linked to network use: IP confi guration,
WiFi confi guration with the option of switching
the camera from a wired to a wireless
connection, ports used, email alert settings,
access to an FTP server, plug and play access
settings.
• Video: here you have access to all of the
settings linked to camera video management:
resolution, number of images per second, night
vision operation, confi guration of photos taken
by the camera, contrast settings, brightness,
etc.
• Detector: here you can activate and confi gure
the movement detection function and the
actions to be launched if an intrusion is
detected.
• PTZ (compatible cameras only): here you will
fi nd all of the settings linked to camera motor
management if it is fi tted.
• System: enables you to reset the camera to 0
or restart it.
When a camera displays its image on the screen,
additional commands are displayed in the bottom
right corner:
1 2 3
16
EN
All manuals and user guides at all-guides.com
u . e i t y u r e c n s s o m o t h w . w w
4 5 6
OUTDOOR 720P IP WIFI CAMERA
1
This icon shows the presence of records on
the computer used (white when idle, green
when programmed/on
records are created)
Broadcast stopped and image closed
2
Start a recording on the disk of the computer
3
used*
Activation/deactivation
4
microphone (cameras fi tted with the
microphone only, your computer must provide
the speakers)
Take a photo and store on the disk of the
5
computer used*
Activation/deactivation of the camera speaker
6
(cameras fi tted with the speaker only, your
computer must provide a microphone)
* For the save and capture functions to be
accessible, the disk to use must be set beforehand.
Click on the System settings icon
software where to save the photos and videos on
the computer hard drive.
To view videos saved on the computer, client on the
Video playback icon
10 11
1 2 3 4 5
1 Open an external video fi le
Quick scroll forward
2
Quick scroll back
3
P l a y b a c k
Stop playback
4
controls
Progress image by image
5
Start playback
6
Pause
7
Current operating day: the coloured time
8
intervals indicate the presence of videos and
their approximate start and end times
detection/manual
of the camera
to tell the
:
6 7 8 14 13 12
9