THOMSON DSC 723S Mode D'emploi page 35

OUTDOOR 720P IP WIFI CAMERA
2.1 - Wireless connection: EzLink function
• Your camera is fitted with the EzLink function: if you have an Android or iOS smartphone or tablet, the
application can connect to the camera when it is shown which WiFi network to use.
Important: To be configured for the EzLink function, your camera must use the default user name and
password. Reset your camera if necessary by holding down the camera "Reset" button
for a least 10 seconds, using a thin tool.
Then connect your smartphone or tablet to the WiFi network that your camera will then use.
Important note: Your camera is not compatible with 5 GHz wireless networks
(802.11ac WiFi network). Do not connect your smartphone or tablet to this type of network.
• Click on the icon then scan the QRCode on the camera.
Once the code has been read, your smartphone or tablet will ask you to choose between Lan and Wifi.
Select Wi-Fi and press "prêt(e) " (ready), please enter the key to the WiFi network you are connected to, to
be able to transmit it to the camera.
All manuals and user guides at all-guides.com
camera
Camera mains
www.thomsonsecurity.eu
C - INSTALLATION
9
EN EN