Assemble Handle
1. Loosen upper fasteners (A).
2. Remove lower fasteners (B).
3. Carefully lift handle to the operating position while guiding
the speed control rod over the tire (C).
A
B
4. Make sure cable ends are secured in holes of control
levers (D).
5. Make sure cables are not caught between the upper and
lower handle (E).
D
2
All manuals and user guides at all-guides.com
6. Reinstall lower fasteners (B). Tighten upper and lower
7. Use the supplied ties to secure the EZ Turn cable (if
1/2"
1/2"
A
B
C
E
fasteners (A and B) securely.
equipped) to the left handle.
A
B
A
B