Publicité
Les langues disponibles
Les langues disponibles
Fax +32 2 359 95 50
(*) Competent qualified electrician: after-sales department of the
producer or importer or any person who is qualified, approved and
competent to perform this kind of repairs in order to avoid all danger.
In case of need you should return the appliance to this electrician.
IMPORTANT INFORMATION
This appliance is not intended for professional use. You should follow the requested breaks.
Failure to follow this instruction carefully may result in damage to the motor. Please refer to the
rating label for the maximum continuous usage time (KB xx min where xx is the maximum usage
time). The breaks should last at least 10 minutes.
IMPORTANT
For a right use and to obtain the best polishing results we recommend not to press the shoes
too hard on the appliance while working, so that the brushes can turn at the maximum speed.
CAUTION: this appliance is not suitable for suede or nubuck shoes.
The fair bristle and the brown bristle brushes allow you to care for both light-coloured and dark
shoes at the same time, provided that you use a colourless wax.
FILLING THE LIQUID WAX CONTAINER
•
Pull on the wax container to separate it from the appliance.
•
Unscrew the pouring lip.
•
If the wax you use is different fom the one you previously used, clean the inside of the
container with water.
•
Pour the liquid wax, preferably colourless, until the container is filled up to three quarters.
•
Put the container back in place by inserting its right side first, then insert the left side.
USE
Make sure that this appliance is placed on an even surface and that it cannot move.
•
•
Plug in the appliance.
•
Make sure the sole of your shoes is not dirty or covered with mud.
•
If necessary, first clean your shoes with a soft damp cloth (to remove the large residues on
top of your shoes) and let them dry thoroughly.
•
Use the hard cleaning brush for the first polishing. To do so, press the ON/OFF switch and
press the shoe slightly against the hard brush.
•
To polish, apply liquid wax on the shoe, pressing once or twice (according to the type of
wax) on the inferior part of the liquid wax container with the shoe to be polished.
•
To polish your shoes, gently press your shoe against one of both polishing brushes.
•
Once your shoes are polished and shined, switch off the appliance by pressing the
ON/OFF switch.
CLEANING
•
Unplug the appliance and let it cool down.
•
Clean the outside only with a dry cloth.
Copies of the I/B. Please reproduce them without any changes
except under special instruction from Team International BELGIUM.
The pages must be reproduced and folded in order to obtain a
booklet A5 (+/- 148.5 mm width x 210 mm height). When folding,
make sure you keep the good numbering when you turn the pages
of the I/B. Don't change the page numbering. Keep the language
integrity.
8
Assembly page 8/36
TKG SP 2 - 151218
Publicité
