HoMedics Mybaby SOUNDSPA LULLABY Mode D'emploi page 9

All manuals and user guides at all-guides.com
NOTE: When the unit is turned on it will always default to the last sound used.
Using the Picture Projection
NOTE: The projector door must be completely closed, pushed all the way up,
in order for the picture projector to function (Fig 6).
1. Turn on the picture projection on by pressing the PROJECTION ON/OFF button (Fig 3).
2. To adjust the brightness of the projection, turn the HI/LO knob (Fig 5) to your desired level.
3. The angle of the projector can be adjusted by angling forward up to 90°
4. When finished using the picture projection you may turn it off by pressing the PROJECTION
ON/OFF button.
NOTE: SOUNDS and PROJECTION are independent functions. You can use one at a time or
both combined.
FIGURE 5
HIGH/LO
KNOB
FRONT
OF UNIT
FIGURE 6
BACK OF UNIT
6
PROJECTOR DOOR
UP FOR PROJECTION
DOWN FOR DISC
DISC STORAGE SLOTS
JACK