All manuals and user guides at all-guides.com
FIGURE 7
IMAGE
DISC
DISC HOLDER
PROJECTOR
DOOR
DISC STORAGE SLOTS
Changing the Image Disc
1. Make sure projection is off, then slide down the projector door and pull out the disc holder (Fig 7).
2. Gently remove the current disc and set aside (Fig 7).
3. Select a new disc from the disc storage slots (Fig 6) and place into the disc holder so that you can
see the word "UP" printed on the disc (Fig 8).
4. Slide the disc holder back into the unit and push projector door up to close (Fig 6).
NOTE: The projector door must be completely closed, pushed all the way up,
in order for the picture projector to function (Fig 6).
5. Put original image disc into empty disc storage slot (Fig 6).
PROJECTION LENS
FIGURE 8
IMAGE
DISC
"UP"
DISC HOLDER
PROJECTOR
DOOR
7