Conceptronic CBTGPS32 Guide D'installation Rapide page 12

ENGLISH
3.2 LED explanation
The Bluetooth
second one is Battery Status LED and the third one is GPS Status LED. The status
table of the LED is shown below:
Category SYMBOL
®
Bluetooth
Status LED
Battery
Status LED
GPS Status
LED
* The CBTGPS32 supports "fuzzy auto on/off". It will automatically enter sleeping
mode after turning off the Bluetooth
With fuzzy auto on/off, when the connection between your device and the
CBTGPS32 is successful, the GPS Receiver will wake up itself. The blue LED of the
GPS Receiver will quickly blink (every 1 sec) and the orange LED of the GPS
Receiver will also be on.
All manuals and user guides at all-guides.com
®
GPS Receiver has three LED lights, one is Bluetooth
COLOR
Blue
Red
Green
Green
Orange
STATUS Function
Always on: Not connected
Slowly Sleeping mode *
blinking:
Quickly Bluetooth
blinking: ready for data transmission
Blinking: The battery is empty
Light On: The battery is charging
Blinking: The battery is fully charged
Always on: Acquiring satellites, GPS position
not fixed
Blinking: GPS position is fixed, Ready for
Navigation
®
connectivity.
12
®
Status LED, the
®
is connected and