Ironside 200038 Mode D'emploi page 3

Installation:
Two-position mounting: on the wall or ceiling by double or single mounting
bracket at the users' convenience.
How to latch and retract cable:
The cable can be stopped and locked at any position:
The ratchet locks and unlocks the cable.
To lock the cable, pull it out and stop when the correct length is obtained.
If the cable is pulled again, the cable is unlocked and retracted when it is
released.
Over heat protection switch:
If the cable temperature is going over to limit, the security switch will cut the
power.
To start it again, wait that the cable is cooled down and press the red button
on the side of the cable reel.
Technical specification:
Model:
Cable length:
Cable type:
Voltage:
Max:
Over heat protection:
200038
12m + 1m
3 x 2.5mm² - Rubber – H07RNF
230V – 50 Hz
16 A
Switch