HOMCOM 370-172V90 Instructions D'installation page 15

First, remove the nut and gasket from the rear axle, then install the wheel, gasket and
nut onto the rear axle in turn, tighten the nut with a wrench, and finally install the wheel
cover on the wheel. Install the rear wheel on the other side in the same way.
First connect the steering wheel cable to the instrument panel, then plug the cable into
the cable hole, and finally align the steering wheel with the connector
Align the windshield to the body position, and fix the clip to the hole position.
2. Install the rear wheels
3. Install the steering wheel
4. Install the windshield
-14-