Cameo F4 FC Manuel D'utilisation page 14

Autolock =
Fan =
Factory Reset =
UC/Loops Reset =
Dimmer Curves
linear
DMX value
SYSTEM INFORMATION (System Info)
Starting from the main display, press on the right push button rotary encoder to move to the main menu. Rotate the left encoder (SELECT)
to select "System Info" menu item (as indicated by selector arrow on left) and confirm by pressing the left encoder (ENTER). Rotate the left
encoder to display the desired information (see chart).
System Info
Main CPU Device firmware
LED Temp. Displays the LED temperature in Celsius or Fahrenheit
Op. Hours Cumulative operating time in hours and minutes
Display Activates/deactivates display
DMX Fail Operating mode if DMX signal is lost
Dim Curve Dimmer Curve
Dim Response Dimmer behavior
Red Shift Activates/deactivates color drift
PWM LED PWM frequency
Calibr. Factory default calibration / no adjustment / user defined adjustment
Color-Cal. R Adjusts red (independent of mode)
Color-Cal. G Adjusts green (independent of mode)
Color-Cal. B Adjusts blue (independent of mode)
Color-Cal. W Adjusts white (independent of mode)
Autolock Activates/deactivates automatic locking of the control element
Fan Fan settings
MANUAL LOCK FUNCTION
While the option is available to have the spotlight lock itself automatically against unintentional or unauthorized use (see "Settings" - "Au-
tolock"), it is also possible to lock the controls manually. Press the center and right push button rotary encoders simultaneously for approx.
3 seconds. Any subsequent attempt to change the controls will display "Locked!" on the display and no further changes to the spotlight
settings can be made via the encoders. After approx. 1 minute the name of the currently set mode then returns. To unlock the controls, press
the center and right push button rotary encoders simultaneously for approx. 3 seconds. The display then returns to whichever information it
had been showing before the lock was applied.
14
Automatically locks the On
control element
Off
Fan settings Auto
Silent
Restores factory Reset Now?
defaults
(but does not reset user
colors or loops)
Resets user colors and Reset User Colors/
loops to factory defaults Loops
exponential logarithmic
DMX value
DMX value
Automatically locks the control element after approx.
30 seconds of inactivity. If a subsequent attempt is
made to use controls, display shows: "Locked!"
Unlock method: simultaneous pressing of center and
right encoder for approx. 3 seconds
Deactivates automatic locking of the control element
Automatic fan control
Fan deactivated, brightness reduced
Reset to factory defaults:
confirm with ENTER, abort with ESC
Reset to factory defaults:
confirm with ENTER, abort with ESC
S-curve
DMX value