Pressalit MATRIX CURVE II Notice De Montage page 2

R2052- R2053
Mounting Instruction
EN
Please read and carefully follow these instructions. Find the product number on the product label and ensure that these
assembly instructions match your product.
WARNING: Failure to comply with these instructions may result in accidents involving serious personal injury or the
product being damaged.
WARNING: If you suspect that any individual parts may be damaged, contact your Pressalit dealer or service
provider. Do not remove, attempt to repair or install parts yourself, unless directed to do so by Pressalit or its
agents.
WARNING: No modi cation of this equipment is allowed without express authorization from Pressalit.
WARNING: These instructions must be followed, and the product must be installed professionally by a quali ed
person; e.g. a licensed plumber, in order to avoid personal injury or property damage while using the product.
WARNING: Pressalit cannot be held liable for injury to persons or damage to property caused by faulty mounting.
Installation location
This product is designed for indoor use in a wet environment, such as a bathroom or washroom. When choosing an
installation location, ensure that there will be adequate space for access to the product.
Assembly and installation
Mount the product in accordance with the illustrations in this assembly instruction. Contact your Pressalit agent, if assistance
is needed when installing the product.
LR
CA
OF
DA
Declaration of performance
Compliance criteria according to EN 14688:2015
Resistance to temperature changes Pass
Resistance to chemicals and staining agents Pass
Surface stability / resistance to scratching Pass
Protection against overflow
Load resistance Pass
Draining of water Pass
Cleanability Pass
R2052: CL 15
R2053: CL 00
Durability Pass
Pressalit
Pressalitvej 1
DK 8680 Ry
Danmark
Page 2/14
2019-11-20
Telephone: +45 87 88 87 88
Telefax: +45 87 88 87 89
E-mail: pressalit@pressalit.com
Web: www.pressalit.com