Storage And Cleaning - Alecto BDM-100 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Press START to activate the measurements
- the cuff will inflate automatically (a 'P' on the
display)
- when the required pressure is reached, the cuff will
deflate and the bloodpressure is measured
- after detecting the systolic, the diastolic and the
pulse, the measured values will be displayed on
the LCD and will be stored in the selected memory
(page-1 or page-2)
4. Press button POWER to switch-OFF the BDM-100
Memory:
The measuring results are automatically stored in
memory, including the time and date of the concerning
measurement.
1. Use button PAGE to select memory-1 or memory-2
2. By repeatedly pressing button MEMO, the results of
previous measurements will come on the display.
The memory-capacity is 60 measurements, 30 for
page-1 and 30 for page-2.
Clean the housing of the product with a damp, soft
cloth. Stains on the cuff can be carefully removed with
a damp cloth. Do not wash or dry clean the cuff. Do not
store the product in a place exposed to direct sunlight
or high humidity.

STORAGE AND CLEANING

26

Publicité

Table des Matières
loading

Table des Matières