brendz KOCHI Manuel De L'utilisateur page 2

GB | Mechanical Water Timer
Read this manual carefully before using the product.
Specifications
Min/Max operating pressure
Working temperature
Waterproof
Inlet thread
Watering duration
Power source
Operation
Connect the timer to the tap (Fig. 1).
Choose you desired watering duration by turning the rotary knob.
The watering duration can be set between 0-120 minutes.
The timer will let water through immediately and stop automatically when the selected time has
passed. Both on and above the rotary knob, you can see the remaining watering time.
To cancel the set watering time, you can turn the knob counterclockwise back to OFF.
The timer will stop watering immediately.
To manually use the water flow without timer, turn the rotary knob counterclockwise
(from OFF to 'manual ON'). To exit the manual mode, turn the knob clockwise to OFF.
Both actions require some force, this is normal.
Time indication
Rotary knob
1 bar – 8 bar (15 psi - 120 psi)
3 °C–50 °C (37 °F–122 °F)
IP 54
3/4" and 1" (Ø26,5 mm / Ø33,3 mm)
From 1 min to 120 min / Constant on
Mechanical, no batteries required
Fig. 1