Publicité
Les langues disponibles
Les langues disponibles
FEATURES
A) Slide Out Glass Shelves
(Number and type of shelves depends on the model) Shelves
can be arranged on any of the rails inside the appliance. It is
protected against being pulled out accidentally. If you want to
remove a shelf, slightly lift up the front part and pull it out.
Perishable foods should be stored towards the back/rear of
the shelves.
B) Door Liner
The door liner consists of various shelves or holders used for
storing eggs, cheese, butter and yogurt as well as other
smaller packages, tubes, cans etc. The lower shelf is used
for storing large bottles.
C) Defrost Water Outlet
The interior of the refrigerator is cooled with a cooling plate
mounted in the rear wall. Under the plate there is a channel
and the outlet for defrost water. Regularly check the defrost
water outlet and the drain channel for blockage. They should
always be kept free and clear of food particles. If the drain
outlet does become clogged, use a plastic straw to unclog it.
D) Fruit and Vegetable crisper
The crisper drawer is on the bottom of the appliance under
the glass shelf. It provides adequate humidity which is
beneficial to fruits and vegetables (less dehydration.)
CHANGING THE DIRECTION OF
THE DOOR SWING
If you find the direction of opening the door on your appliance inconvenient, you can change it. Holes on the opposite
side have already been prepared in the factory. See figure below for a guide to the components that must be removed
and switched to the other side.
INSTALLATION INSTRUCTIONS
4
Publicité
