Prowork PSS 150 Mode D'emploi page 4

Anleitung PSS 150 SPK 1
GB
Please read these operating instruc-
tions carefully with particular attention
to the safety notes. Always store these
operating instruccions together with
the vibrating grinder.
Technical data
Voltage 230 Volts
Power consumption 150 Watts
Grinding surface area 187 x 90 mm
Sandpaper size 240 x 90 mm
Vibrations per minute 11,000
Sound pressure level LPA 84,2 dB(A)
Sound power level LWA 97,2 dB(A)
Vibration a w <2,5 m/s
2
Weight 1,4 kg
Totally insulated
Included in delivery
PSS 150,
Dust extraction connector
Operating instructions,
1 sheets of sandpaper
General safety notes
– Always remove the plug from the power
supply socket before carrying out any
maintenance or repair work such as
cleaning the sander or changing the
sandpaper!
– Always disconnect the machine by
removing the plug from the socket, not
by pulling on the mains cable.
– Always wear safety goggles and dust
mask when working.
– Keep the workplace clean and well illu-
minated.
– Ensure that the workpiece is sufficiently
secured so that you are able to work
safety and effectively.
– Keep children away from the machine.
– Always keep your machine clean, and
check for possible defects of damage
after every job.
– Always ensure that the switch is swit-
ched off before you insert the plug into
the power supply socket.
– Ensure that any platforms you are wor-
king on are sturdy and stable.
– If the machine is damaged, use the
exploded diagram and the spare parts
list to determine the precise cause of
the damage, and order any neccessary
parts from Customer
Service.
– The pad sander is not designed for wet
sanding.
4
03.03.2004 14:33 Uhr
1 Front gripp
2 On/Off trigger
3 Locking button
4 Main grip
5 Vacuum cleaner
attachment
6 Vibration plate
7 Clamping device
Attaching the dust extraction
connector
Note!
For health reasons, you must use a dust
extraction device.
On/Off switch
On: Press trigger 2.
Continuous Lock trigger 2 with locking
operation: button 3.
Off: Briefly depress trigger 2.
Seite 4