Location And Functions Of Parts And Controls - Sony IPELA SNT-V704 Manuel D'installation

Location and Functions of Parts and
Controls
Front/Side
3
8
a POWER indicator (green)
When the power is supplied to this unit,
this indicator lights up.
Refer to the User's Guide recorded in the
supplied CD-ROM for details of
Administrator menu settings.
b NETWORK indicator (orange/
green)
The indicator flashes in orange when
this unit is connected to the 10BASE-T
network; it flashes in green when this
unit is connected to the 100BASE-TX
network.
The indicator goes off when this unit is
not connected to the network.
8
GB

Location and Functions of Parts and Controls

1
4 5
1
RS-232C
I/O
13
9 0 qa
2
6
12
1 2 3 4
24
SEE INSTRUCTION MANUAL CLASS 2 WIRING DC 12V
qs qd
c USB connectors
A commercially available USB flash
memory, etc. can be connected.
When connecting a USB hard disk drive,
use the drive to which the power source
is supplied from external equipment.
Note
You cannot use a USB hard disk drive to
which the power should be supplied
from the USB port. The USB disk drive
must be formatted with the FAT file
format.
d RS-232C connector (D-sub 9
pin)
Connects with VISCA RS-232C
connector of the camera(s).
7
qf