Configuration; Serial Commissioning - Häfele Dialock MDU 100 Instructions De Service

Configuration

Serial commissioning

Menu path:
Description:
68
Dialock MDU 100 - status: 09.2013 - 732.29.197
Main menu / Terminal functions /
Configuration /
This function can be used to commission
several terminals in series.
Attention:
This menu item is only displayed when data
has been transformed from computer software
to MDU before.
Terminal data such as room number, operating
mode, open time or time zone etc. have to be
configured in computer software and transfered
to MDU.
Activate data transfer (see page 61 „Data
exchange between MDU and terminal using the
infrared interface") and enter the room number
of the terminal concerned. After successful data
transfer, the signal "Data transfered" appears.
To identify the successful commissioning, a tick
mark appears in the list box behind the room
number .
Carry out the same procedure for each
terminal.
Operating Instructions