Olympus M.Zuiko Digital ED 25mm f1.2 PRO Mode D'emploi page 5

INSTRUCTIONS
EN
Thank you for purchasing this Olympus product.
To ensure your safety, please read this
instruction manual before use, and keep it
handy for future reference.
Name of parts
1 Lens hood 4 Mount index
2 Focus ring 5 Depth-of-field indicator
3 L-Fn button 6 Distance indicator
Changing focus methods (Fig. 1)
Change between AF/MF by sliding the focus ring.
• Position in which distance indicator cannot be
seen AF/MF
You can switch between AF/MF by using the
camera's settings.
• Position in which distance indicator can be
seen MF
Autofocus is not available; focus by rotating
the lens focus ring. Depth of field varies with
the aperture selected with the camera and
is shown by the depth-of-field indicator on
the lens.
L-Fn button
The AF stops functioning while the button is
pressed.
Attaching the hood (Fig. 2)/
Storing the hood (Fig. 3)
To remove the hood, rotate it while pressing the
release.
Notes on Shooting
• Edges of pictures may be cut off if more than
one filter is used or if a thick filter is used.
• When using a flash, flash light may be blocked
by the lens body, lens hood, etc.
• The focus distance may change when the
focusing method is switched from MF to AF/
MF and then back to MF. Readjust the focus
distance.
• The distance and depth-of-field indicators are
intended as guides only.
7
EN