Publicité
Les langues disponibles
Les langues disponibles
Button Functions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Note: The REC button must be pressed TWICE to record
from your VCR. For some brands of VCRs, you might need to
press the REC button once, then press it again for three
seconds. Some buttons on the remote might have functions
that are referred to by different names on the device you are
controlling. E.G. LAST may be called RECALL, or ENTER
may be called DISPLAY. These differences depend on the
brand and model of your product. Also, this remote can only
operate features that exist on your product. E.G., your
product must have LAST ability for the LAST button to
operate this feature.
4
All manuals and user guides at all-guides.com
22.
21.
20.
19.
18.
17.
16.
15.
14.
13.
12.
Button Functions, cont.
1. Red Indicator Lights when any button is pressed.
2. TV, DVD, SAT etc. Selects product to be operated.
3. NUMBERS Enter numbers for direct channel
selection. Some products require Enter to be
pressed after channel selection.
4. ENTER Used after direct channel number entry to
immediately change to the selected channel.
5. MENU Brings up the device Menu screen (if
available) - use with UP, DOWN, LEFT, and RIGHT
navigation buttons.
6. GUIDE displays on-screen program or channel
guides.
7. VOLUME UP/DOWN Changes the volume level of
the product, normally the TV.
8. UP, DOWN, LEFT & RIGHT navigation buttons.
9. CC (SUBTITLE) TV Closed Caption (if your TV has
this feature) or DVD Subtitle toggle.
10. MUTE Turns off the TV sound while the picture
remains.
11. WIDE Aspect Ratio Control selects viewing format
for the displayed picture.
12. RECORD, PLAY, STOP, REW, FF, PAUSE VCR
control buttons operate your VCR even when the
remote is set to operate the TV. Also operates DVD
Scan -/+.
13. MTS selects MultiTrack Sound (if available).
14. INPUT For some TVs, press repeatedly to select
available viewing sources (antenna, cable box, VCR,
etc.).
15. LAST/REPEAT Returns to the previously selected
channel, or DVD repeat toggle.
16. OK Selects menu items for the device you are
controlling.
17. CHANNEL UP/DOWN Changes the channels.
CHAPTER +/- controls DVD/CD track selection i.e.
DVD/CD Track Skip Up/Down (in DVD and SAT
modes). Note the VCR buttons also control DVD
when in DVD Mode.
18. EXIT/RETURN Used to exit menu functions.
19. INFO Displays/selects on-screen channel
information, etc.
20. DOT/DASH Used for digital channels, e.g. 2-3.
21. SETUP Used for setup.
22. POWER Turns product On or Off.
5
Publicité
