Publicité
Les langues disponibles
Les langues disponibles
4 Vacuum cleaning
For further tips, see Quick Start Guide Operation.
Vacuuming with the floor nozzle
TIP: The floor nozzle can also be used without the suction tube in order to vacuum furniture, for
instance. In this regard, make sure that the surface can withstand the load of the brush roller without
sustaining damage.
Vacuuming in Eco mode
The appliance vacuums at the lowest power in Eco mode. The appliance consumes less energy and the oper-
ating time of the rechargeable battery is extended. The brush roller on the floor nozzle rotates.
1.
Attach the floor nozzle to the suction tube.
2.
Press the On/off switch to switch on the appliance.
The appliance vacuums in Eco mode.
–
The LEDs on the rechargeable battery light up.
–
The LEDs on the floor nozzle illuminate the work area in front of the floor nozzle.
–
3.
Vacuum the floor.
4.
Press the On/off switch to switch off the appliance.
5.
Empty and clean the dust container ("Emptying the dust container" on page 28).
Vacuuming in Power mode
The appliance vacuums at full power in Power mode. The brush roller on the floor nozzle rotates.
1.
Attach the floor nozzle to the suction tube.
2.
Press the On/off switch to switch on the appliance.
The appliance vacuums in Eco mode.
–
The LEDs on the rechargeable battery light up.
–
The LEDs on the floor nozzle illuminate the work area in front of the floor
–
nozzle.
3.
Press the mode selector switch to select the operating mode.
Press 1x to activate Power mode.
–
Press 2x to activate Eco mode again.
–
4.
Vacuum the floor.
5.
Press the On/off switch to switch off the appliance.
6.
Empty and clean the dust container ("Emptying the dust container" on page 28).
V
acuum clEaninG
27
Publicité
