MO-EL SWAN Emploi Et Entretien page 7

9.Do not bring modifications to the product that compromise the safe-
ty.
10.Keep connections dry.
11.Never plunge the appliance in water.
12.Never use hair spray when the appliance is working.
13.In order to assure an additional protection, it is suggested to install
in the electric circuit feeding the bathroom a safety switch with nom-
inal differential current not higher then 30 mA. Ask to the electrician
about this point.
14.In order to have the maximum efficiency, do not occlude the air
intake.
15.If the power supply cord is damaged avoid to use it. Let the Manu-
facturer, or the After Sale Service, or some similar qualified person
replace it, in order to avoid any risk.
16.Disconnect the appliance from the power supply when not used.
17.Always unplug the appliance before doing any maintenance opera-
tion.
18.Periodically verify the integrity of the appliance. If defects are found,
do not use it; call an Authorized After Sale Service.
19.In case of malfunction or fault, call an Authorized After Sale Service,
and request original spare parts.
INSTALLATION
This hairdryer must be installed out of the range of a person us-
ing the bath or the shower.
Connect the plug in such way that the cable, when extended, do
not let the appliance to be near to the water contained in bath
tubs, sinks, or other containers.
The hairdryers must be fixed to the wall with plastic expansion
dowels. It is recommended not to remove the appliance after
installation for repositioning it in another place.
1.Unscrew the screw on the bottom of the wall support and disassem-
ble the front cover.
2.Use the wall support as a template to mark the holes for attachment.
3.Make 4 holes of 6mm diameter and depth of about 35mm in the wall
where the appliance is to be fixed.
7