Britec ELEGANCE BA20 Manuel D'instructions page 46

5 . Timer operation
Timer ON setting:
– When the air-conditioner is OFF, press the "Timer" button and select a desired ON time
through the temperature and time setting buttons.
– "Preset ON Time" is displayed on the operation panel.
– ON time can be regulated at any time in 0-24 hours.
Timer OFF setting
– When the air-conditioner ON, press "Timer" button and select a desired OFF time
through the temperature and time setting buttons.
– "Preset OFF Time" is displayed on the operation panel.
– OFF time can be regulated at any time in 0-24 hours.
6 . UV Function.
Press Timer button for more than 10 seconds to turn on/off the UV light.
7. WIFI function
- Long press the SPEED button for 5s, enter the WIFI factory set up mode;
- The unit is connected with WIFI If the WIFI indicator is on, other wise is not
connected. When the WIFI indicator flashing slowly, the unit is at the WIFI AP
mode, if flashing quickly, the unit is at the WIFI normal mode.
- You can realize all the air conditioner functions by the mobile phone APP with
the WIFI connected.
7. Installation Explanations
1. Installation Explanations:
– A removal air-conditioner shall be installed in the flat and empty place all around. Don't
block the air outlet, and the required distance around should be at least 30cm. (See Fig.3)
– Should not be installed in wet location, such as the laundry room.
– Socket wiring should be in accordance with the local electric safety requirements.
46
www.britec.es