Hoover Quest 600 Mode D'emploi page 8

Get to know your Quest
3
1
2
5
Robot Vaccum
TM
5
4
6
1. Side brush:
- sweeps dirt to the main brush
- may be pulled off for low pile carpet
cleaning
2. IR sensor:
- guides Quest ™ back to its docking
station as soon as the battery capacity
becomes low or it receives the
respective command from the remote
control or Hoover App
3. LED indicators
* See Trouble Shooting (page 16 )for
information on LED functionality
4. "ON/OFF"( ) button:
- Press & hold for 2 seconds to start/stop
your robot
5. Top panel
- provides access to dirt cup & filter
6. Bumper:
- senses impact and tells the robot to move
another direction
- if triggered constantly for 5 seconds or
longer the robot will stop automatically