Cuda surgical LLS-3736-2 Manuel Opérateur page 3

1. INTENDED USE
The LLS-3736-2, 2-bay battery charger is intended to charge 2054-style, smart, li-ion battery
packs supplied by ST Technologies
2. WARNINGS
Upon initial receipt and before each use, inspect each battery and charger for damage. Do not
•
attempt to charge a damaged battery. Do not attempt to operate the charger if the cord and/or
plug appear to be damaged, such as cuts, bent pins or contacts, and/or cracks.
Do not expose the charger to heat, fire, or mechanical shock.
•
• Place the charger in a cool spot, away from any heat sources.
• Do not use this equipment in the presence of a mixture containing flammable anesthetic and/or
air or oxygen or nitrous oxide.
• Do not sterilize, immerse, or expose the charger, or power supply to water, solvents, lubricants,
or other chemicals to clean the charger unless otherwise directed. Do not allow water to collect in
the bays or on top of the charger. Do not allow water to enter the power connection on the back
of the charger. Keep clean and dry.
• Do not short-circuit, crush, open, shred, incinerate, or dismantle the charger or the power supply
brick.
LIT-232 ®
CUDA Surgical
Rev. B
® .
Page 3 of 48
(English)