Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTION MANUAL VOSS.FARMING SUNNY 800
TIP 6: IMPROVE GROUNDING
1. Drive the earth rods into damp soil at least 1 m deep and 10 m away from the building.
2. If necessary, add more rods at a distance of at least 3 m between them and connect them
together. Earth rods must be non-rusting, which means they are either stainless steel or
galvanised.
TIP 7: TYPICAL LAYOUT OF AN ELECTRIC FENCE SYSTEM
1
3
2
1. ENERGISER
It supplies power to the fence system. The choice of a unit depends on the total fence length,
animal species to be fenced in or out and available power supply options. There are 9 V battery
energisers, 12V rechargeable battery energisers and mains energisers.
2. HIGH VOLTAGE CABLE
This cable is multi-purpose. It is used, among other things, to connect the energiser to the
grounding rod or connecting several rods together. In addition, high-voltage cables are used to
pass electricity close to the ground or underground.
N OTI CE
Only 1-core (high-voltage suitable) cables may be used and never commercially
available 3-core household cables (NYM cables). To prevent damage from stones,
rodents, etc, you can pass the cable through a garden hose or similar.
3. GROUNDING ROD / EARTHING
The basic requirement for a functional electric fence, optimal fence voltage and fence security
is good grounding. The ideal distance between grounding rods is 3 m and they should be pushed
as deep as possible into the ground. In accordance to VDE, fence and house grounding must be
at least 10m apart.
42088 - 11.2022 - V5
4
5
6
2
DE
EN
FR
IT
NL
SV
ES
PL
37
Publicité
