ATT JUMBO LIFT 3200 NT Manuel D'exploitation page 59

Les langues disponibles

System master sheet

2.1

Manufacturer

Nussbaum Custom Lifts GmbH

Hertz Str. 6

D-77694 Kehl-Sundheim

2.2

Purpose

The JUMBO LIFT 3200 NT - HYMAX 3200 PH lift is a lift for cars up to a total weight of 3,200 kg in normal work

shop operations and a maximum load distribution of 3:2 or 2:3 in the drive-in direction or against the drive-

in direction.

Additionally, there is a distinction between cars operated with front or rear drive.

Set up of the standard lift in explosion endangered workshops or humid work shops (e.g. outside and wash-

ing halls) is prohibited. After construction and significant maintenance changes on load carrying parts the

lift must be inspected afterwards by a specialist who approves the changes.

Operation of the lift is done by an operating unit that is located immediately next to the lift.

2.3

Changes to the design / construction

Inspections by a technical expert are required before recommissioning (date, type of change, technical

expert signature).

______________________________________________________________________________________________________

Name, address of technical expert

_________________________________________________

Location, date

2.4

Changing the assembly location

Inspections by a technical expert are required before recommissioning (date, type of change, specialist

signature).

______________________________________________________________________________________________________

Name, address of technical expert

_________________________________________________

Location, date

OPI_JUMBO LIFT 3200 NT_V3.1_DE-EN-FR-ES-IT

_________________________________________________

Technical expert signature

_________________________________________________

Signature of Technical Expert of Safety inspections

Jumbo lift 3200 hf